dmesg - Intel Xeon X5260

Return To Intel Xeon X5260 System Information

microcode: microcode updated early to revision 0x60f, date = 2010-09-29
Linux version 4.15.0-106-generic (buildd@lcy01-amd64-016) (gcc version 7.5.0 (Ubuntu 7.5.0-3ubuntu1~18.04)) #107-Ubuntu SMP Thu Jun 4 11:27:52 UTC 2020 (Ubuntu 4.15.0-106.107-generic 4.15.18)
KERNEL supported cpus:
  Intel GenuineIntel
  AMD AuthenticAMD
  Centaur CentaurHauls
x86/fpu: x87 FPU will use FXSAVE
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000b1dbffff] usable
BIOS-e820: [mem 0x00000000b1dc0000-0x00000000b1dcdfff] ACPI data
BIOS-e820: [mem 0x00000000b1dce000-0x00000000b1deffff] ACPI NVS
BIOS-e820: [mem 0x00000000b1df0000-0x00000000bfffffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000023fffffff] usable
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: BIOSTAR Group G41D3C/G41D3C, BIOS 080015  08/24/2011
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
e820: last_pfn = 0x240000 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-CFFFF write-protect
  D0000-DFFFF uncachable
  E0000-EFFFF write-through
  F0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 0000000000 mask 3E00000000 write-back
  1 base 0200000000 mask 3FC0000000 write-back
  2 base 00C0000000 mask 3FC0000000 uncachable
  3 base 00B1E00000 mask 3FFFE00000 uncachable
  4 base 00B2000000 mask 3FFE000000 uncachable
  5 base 00B4000000 mask 3FFC000000 uncachable
  6 base 00B8000000 mask 3FF8000000 uncachable
  7 disabled
x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT  
total RAM covered: 7966M
Found optimal setting for mtrr clean up
 gran_size: 64K 	chunk_size: 4M 	num_reg: 7  	lose cover RAM: 0G
e820: update [mem 0xb1e00000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xb1dc0 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000ff780-0x000ff78f]
Scanning 1 areas for low memory corruption
BRK [0x16f995000, 0x16f995fff] PGTABLE
BRK [0x16f996000, 0x16f996fff] PGTABLE
BRK [0x16f997000, 0x16f997fff] PGTABLE
BRK [0x16f998000, 0x16f998fff] PGTABLE
BRK [0x16f999000, 0x16f999fff] PGTABLE
BRK [0x16f99a000, 0x16f99afff] PGTABLE
BRK [0x16f99b000, 0x16f99bfff] PGTABLE
BRK [0x16f99c000, 0x16f99cfff] PGTABLE
RAMDISK: [mem 0x30afb000-0x34574fff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F8D90 000024 (v02 ACPIAM)
ACPI: XSDT 0x00000000B1DC0100 000054 (v01 082411 XSDT1515 20110824 MSFT 00000097)
ACPI: FACP 0x00000000B1DC0290 0000F4 (v04 082411 FACP1515 20110824 MSFT 00000097)
ACPI: DSDT 0x00000000B1DC0440 005BAE (v02 G41SN  G41SN824 00000824 INTL 20051117)
ACPI: FACS 0x00000000B1DCE000 000040
ACPI: FACS 0x00000000B1DCE000 000040
ACPI: APIC 0x00000000B1DC0390 00006C (v02 082411 APIC1515 20110824 MSFT 00000097)
ACPI: MCFG 0x00000000B1DC0400 00003C (v01 082411 OEMMCFG  20110824 MSFT 00000097)
ACPI: OEMB 0x00000000B1DCE040 000072 (v01 082411 OEMB1515 20110824 MSFT 00000097)
ACPI: GSCI 0x00000000B1DCE0C0 002024 (v01 082411 GMCHSCI  20110824 MSFT 00000097)
ACPI: SSDT 0x00000000B1DD0580 000363 (v01 DpgPmm CpuPm    00000012 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000023fffffff]
NODE_DATA(0) allocated [mem 0x23ffd1000-0x23fffbfff]
tsc: Fast TSC calibration using PIT
Zone ranges:
  DMA      [mem 0x0000000000001000-0x0000000000ffffff]
  DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
  Normal   [mem 0x0000000100000000-0x000000023fffffff]
  Device   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x0000000000001000-0x000000000009efff]
  node   0: [mem 0x0000000000100000-0x00000000b1dbffff]
  node   0: [mem 0x0000000100000000-0x000000023fffffff]
Reserved but unavailable: 98 pages
Initmem setup node 0 [mem 0x0000000000001000-0x000000023fffffff]
On node 0 totalpages: 2039134
  DMA zone: 64 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 11319 pages used for memmap
  DMA32 zone: 724416 pages, LIFO batch:31
  Normal zone: 20480 pages used for memmap
  Normal zone: 1310720 pages, LIFO batch:31
Reserving Intel graphics memory at 0x00000000b2000000-0x00000000bfffffff
ACPI: PM-Timer IO Port: 0x808
ACPI: Local APIC address 0xfee00000
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
smpboot: Allowing 4 CPUs, 2 hotplug CPUs
PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
PM: Registered nosave memory: [mem 0xb1dc0000-0xb1dcdfff]
PM: Registered nosave memory: [mem 0xb1dce000-0xb1deffff]
PM: Registered nosave memory: [mem 0xb1df0000-0xbfffffff]
PM: Registered nosave memory: [mem 0xc0000000-0xfedfffff]
PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
e820: [mem 0xc0000000-0xfedfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645519600211568 ns
random: get_random_bytes called from start_kernel+0x99/0x4fd with crng_init=0
setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
percpu: Embedded 45 pages/cpu s147456 r8192 d28672 u524288
pcpu-alloc: s147456 r8192 d28672 u524288 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 
Built 1 zonelists, mobility grouping on.  Total pages: 2007250
Policy zone: Normal
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 7872340K/8156536K available (12300K kernel code, 2481K rwdata, 4272K rodata, 2436K init, 2720K bss, 284196K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Kernel/User page tables isolation: enabled
ftrace: allocating 39378 entries in 154 pages
Hierarchical RCU implementation.
	RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
	Tasks RCU enabled.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
NR_IRQS: 524544, nr_irqs: 456, preallocated irqs: 16
vt handoff: transparent VT on vt#1
Console: colour dummy device 80x25
console [tty0] enabled
ACPI: Core revision 20170831
ACPI: 2 ACPI AML tables successfully acquired and loaded
APIC: Switch to symmetric I/O mode setup
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
tsc: Fast TSC calibration using PIT
tsc: Detected 3333.222 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6666.44 BogoMIPS (lpj=13332888)
pid_max: default: 32768 minimum: 301
Security Framework initialized
Yama: becoming mindful.
AppArmor: AppArmor initialized
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
CPU0: Thermal monitoring enabled (TM2)
process: using mwait in idle threads
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Full generic retpoline
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Speculative Store Bypass: Vulnerable
MDS: Vulnerable: Clear CPU buffers attempted, no microcode
Freeing SMP alternatives memory: 36K
smpboot: CPU0: Intel(R) Xeon(R) CPU           X5260  @ 3.33GHz (family: 0x6, model: 0x17, stepping: 0x6)
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
... version:                2
... bit width:              40
... generic registers:      2
... value mask:             000000ffffffffff
... max period:             000000007fffffff
... fixed-purpose events:   3
... event mask:             0000000700000003
Hierarchical SRCU implementation.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node  #0, CPUs:      #1
smp: Brought up 1 node, 2 CPUs
smpboot: Max logical packages: 2
smpboot: Total of 2 processors activated (13332.88 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 128MB
evm: security.selinux
evm: security.SMACK64
evm: security.SMACK64EXEC
evm: security.SMACK64TRANSMUTE
evm: security.SMACK64MMAP
evm: security.apparmor
evm: security.ima
evm: security.capability
PM: Registering ACPI NVS region [mem 0xb1dce000-0xb1deffff] (139264 bytes)
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 1024 (order: 4, 65536 bytes)
pinctrl core: initialized pinctrl subsystem
RTC time: 13:53:29, date: 06/15/20
NET: Registered protocol family 16
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1592229209.156:1): state=initialized audit_enabled=0 res=1
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: Using configuration type 1 for base access
HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Added _OSI(Linux-Dell-Video)
ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Dynamic OEM Table Load:
ACPI: SSDT 0xFFFF8E1FB6725000 00048A (v01 DpgPmm P001Ist  00000011 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S1 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: GPE 0x1B active on init
ACPI: Enabled 13 GPEs in block 00 to 1F
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: root bus resource [mem 0xb1e00000-0xdfffffff window]
pci_bus 0000:00: root bus resource [mem 0xf0000000-0xffffffff window]
pci_bus 0000:00: root bus resource [bus 00-ff]
pci 0000:00:00.0: [8086:2e30] type 00 class 0x060000
DMAR: Forcing write-buffer flush capability
DMAR: Disabling IOMMU for graphics on this chipset
pci 0000:00:02.0: [8086:2e32] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xfe400000-0xfe7fffff 64bit]
pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:02.0: reg 0x20: [io  0xdc00-0xdc07]
pci 0000:00:1b.0: [8086:27d8] type 00 class 0x040300
pci 0000:00:1b.0: reg 0x10: [mem 0xfeaf8000-0xfeafbfff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:27d0] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:27d2] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:27c8] type 00 class 0x0c0300
pci 0000:00:1d.0: reg 0x20: [io  0xd880-0xd89f]
pci 0000:00:1d.1: [8086:27c9] type 00 class 0x0c0300
pci 0000:00:1d.1: reg 0x20: [io  0xd800-0xd81f]
pci 0000:00:1d.2: [8086:27ca] type 00 class 0x0c0300
pci 0000:00:1d.2: reg 0x20: [io  0xd480-0xd49f]
pci 0000:00:1d.3: [8086:27cb] type 00 class 0x0c0300
pci 0000:00:1d.3: reg 0x20: [io  0xd400-0xd41f]
pci 0000:00:1d.7: [8086:27cc] type 00 class 0x0c0320
pci 0000:00:1d.7: reg 0x10: [mem 0xfeaf7c00-0xfeaf7fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:27b8] type 00 class 0x060100
pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
pci 0000:00:1f.0: quirk: [io  0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io  0x0480-0x04bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0a00 (mask 00ff)
pci 0000:00:1f.1: [8086:27df] type 00 class 0x01018a
pci 0000:00:1f.1: reg 0x10: [io  0x0000-0x0007]
pci 0000:00:1f.1: reg 0x14: [io  0x0000-0x0003]
pci 0000:00:1f.1: reg 0x18: [io  0x08f0-0x08f7]
pci 0000:00:1f.1: reg 0x1c: [io  0x08f8-0x08fb]
pci 0000:00:1f.1: reg 0x20: [io  0xffa0-0xffaf]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x10: [io  0x01f0-0x01f7]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x14: [io  0x03f6]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x18: [io  0x0170-0x0177]
pci 0000:00:1f.1: legacy IDE quirk: reg 0x1c: [io  0x0376]
pci 0000:00:1f.2: [8086:27c0] type 00 class 0x01018f
pci 0000:00:1f.2: reg 0x10: [io  0xd080-0xd087]
pci 0000:00:1f.2: reg 0x14: [io  0xd000-0xd003]
pci 0000:00:1f.2: reg 0x18: [io  0xcc00-0xcc07]
pci 0000:00:1f.2: reg 0x1c: [io  0xc880-0xc883]
pci 0000:00:1f.2: reg 0x20: [io  0xc800-0xc80f]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:27da] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x20: [io  0x0400-0x041f]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:02:00.0: [1969:2062] type 00 class 0x020000
pci 0000:02:00.0: reg 0x10: [mem 0xfebc0000-0xfebfffff 64bit]
pci 0000:02:00.0: reg 0x18: [io  0xec00-0xec7f]
pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1e.0: PCI bridge to [bus 03] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000dffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xb1e00000-0xdfffffff window] (subtractive decode)
pci 0000:00:1e.0:   bridge window [mem 0xf0000000-0xffffffff window] (subtractive decode)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 6 7 10 11 12 14 15)
SCSI subsystem initialized
libata version 3.00 loaded.
pci 0000:00:02.0: vgaarb: setting as boot VGA device
pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
pci 0000:00:02.0: vgaarb: bridge control possible
vgaarb: loaded
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
EDAC MC: Ver: 3.0.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
Expanded resource Reserved due to conflict with PCI Bus 0000:00
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0xb1dc0000-0xb3ffffff]
NetLabel: Initializing
NetLabel:  domain hash size = 128
NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel:  unlabeled traffic allowed by default
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
hpet clockevent registered
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource hpet
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
AppArmor: AppArmor Filesystem Enabled
pnp: PnP ACPI init
system 00:00: [mem 0xfed14000-0xfed19fff] has been reserved
system 00:00: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:02: [dma 0 disabled]
pnp 00:02: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:03: [io  0x0a00-0x0a0f] has been reserved
system 00:03: [io  0x0a10-0x0a1f] has been reserved
system 00:03: [io  0x0a20-0x0a2f] has been reserved
system 00:03: [io  0x0a30-0x0a3f] has been reserved
system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:04: [io  0x04d0-0x04d1] has been reserved
system 00:04: [io  0x0800-0x087f] has been reserved
system 00:04: [io  0x0480-0x04bf] has been reserved
system 00:04: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:04: [mem 0xfed20000-0xfed8ffff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:05: [mem 0xffc00000-0xffefffff] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:06: [mem 0xfec00000-0xfec00fff] could not be reserved
system 00:06: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:07: [mem 0xe0000000-0xefffffff] has been reserved
system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:08: [mem 0x00000000-0x0009ffff] could not be reserved
system 00:08: [mem 0x000c0000-0x000cffff] could not be reserved
system 00:08: [mem 0x000e0000-0x000fffff] could not be reserved
system 00:08: [mem 0x00100000-0xb1dfffff] could not be reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 9 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000 add_align 100000
pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.0: BAR 13: assigned [io  0x1000-0x1fff]
pci 0000:00:1c.0: PCI bridge to [bus 01]
pci 0000:00:1c.0:   bridge window [io  0x1000-0x1fff]
pci 0000:00:1c.0:   bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0:   bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 02]
pci 0000:00:1c.1:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.1:   bridge window [mem 0xfeb00000-0xfebfffff]
pci 0000:00:1c.1:   bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 03]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:00: resource 8 [mem 0xb1e00000-0xdfffffff window]
pci_bus 0000:00: resource 9 [mem 0xf0000000-0xffffffff window]
pci_bus 0000:01: resource 0 [io  0x1000-0x1fff]
pci_bus 0000:01: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:01: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
pci_bus 0000:02: resource 1 [mem 0xfeb00000-0xfebfffff]
pci_bus 0000:02: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:03: resource 4 [io  0x0000-0x0cf7 window]
pci_bus 0000:03: resource 5 [io  0x0d00-0xffff window]
pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 7 [mem 0x000d0000-0x000dffff window]
pci_bus 0000:03: resource 8 [mem 0xb1e00000-0xdfffffff window]
pci_bus 0000:03: resource 9 [mem 0xf0000000-0xffffffff window]
NET: Registered protocol family 2
TCP established hash table entries: 65536 (order: 7, 524288 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 65536 bind 65536)
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:02:00.0: [Firmware Bug]: disabling VPD access (can't determine size of non-standard VPD format)
PCI: CLS 32 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 59880K
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0xaddc0000-0xb1dc0000] (64MB)
Scanning for low memory corruption every 60 seconds
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=36 max_order=21 bucket_order=0
zbud: loaded
squashfs: version 4.0 (2009/01/31) Phillip Lougher
fuse init (API version 7.26)
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: enabling device (0104 -> 0107)
vesafb: mode is 1024x768x32, linelength=4096, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xd0000000, mapped to 0x        (ptrval), using 3072k, total 3072k
Console: switching to colour frame buffer device 128x48
fb0: VESA VGA frame buffer device
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
(NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THRM] (40 C)
Linux agpgart interface v0.103
loop: module loaded
ata_piix 0000:00:1f.1: version 2.13
scsi host0: ata_piix
scsi host1: ata_piix
ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
scsi host2: ata_piix
scsi host3: ata_piix
ata3: SATA max UDMA/133 cmd 0xd080 ctl 0xd000 bmdma 0xc800 irq 19
ata4: SATA max UDMA/133 cmd 0xcc00 ctl 0xc880 bmdma 0xc808 irq 19
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
PPP generic driver version 2.4.2
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci 0000:00:1d.7: EHCI Host Controller
ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1d.7: debug port 1
ehci-pci 0000:00:1d.7: cache line size of 32 is not supported
ehci-pci 0000:00:1d.7: irq 23, io mem 0xfeaf7c00
ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 4.15.0-106-generic ehci_hcd
usb usb1: SerialNumber: 0000:00:1d.7
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 8 ports detected
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.0: detected 2 ports
uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000d880
usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 4.15.0-106-generic uhci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.1: detected 2 ports
uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d800
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 4.15.0-106-generic uhci_hcd
usb usb3: SerialNumber: 0000:00:1d.1
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.2: detected 2 ports
uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d480
usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: UHCI Host Controller
usb usb4: Manufacturer: Linux 4.15.0-106-generic uhci_hcd
usb usb4: SerialNumber: 0000:00:1d.2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.3: detected 2 ports
uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d400
usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: UHCI Host Controller
usb usb5: Manufacturer: Linux 4.15.0-106-generic uhci_hcd
usb usb5: SerialNumber: 0000:00:1d.3
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
i8042: PNP: No PS/2 controller found.
i8042: Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:01: RTC can wake from S4
rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:01: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.37.0-ioctl (2017-09-20) initialised: dm-devel@redhat.com
ledtrig-cpu: registered to indicate activity on CPUs
NET: Registered protocol family 10
Segment Routing with IPv6
NET: Registered protocol family 17
Key type dns_resolver registered
mce: Using 6 MCE banks
RAS: Correctable Errors collector initialized.
microcode: sig=0x10676, pf=0x4, revision=0x60f
microcode: Microcode Update Driver: v2.2.
sched_clock: Marking stable (983117132, 0)->(967420613, 15696519)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: b1772ce3e036cbf6bf2b7e9ed9be0f8806d61091'
zswap: loaded using pool lzo/zbud
Key type big_key registered
Key type trusted registered
Key type encrypted registered
AppArmor: AppArmor sha1 policy hashing enabled
ima: No TPM chip found, activating TPM-bypass! (rc=-19)
ima: Allocated hash algorithm: sha1
evm: HMAC attrs: 0x1
  Magic number: 8:843:887
graphics fb0: hash matches
pci 0000:00:1f.0: hash matches
rtc_cmos 00:01: setting system clock to 2020-06-15 13:53:30 UTC (1592229210)
BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
EDD information not available.
ata3.00: ATA-8: ST1000DM010-2EP102, CC43, max UDMA/133
ata3.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 0/32)
ata3.00: configured for UDMA/133
scsi 2:0:0:0: Direct-Access     ATA      ST1000DM010-2EP1 CC43 PQ: 0 ANSI: 5
sd 2:0:0:0: Attached scsi generic sg0 type 0
sd 2:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
sd 2:0:0:0: [sda] 4096-byte physical blocks
sd 2:0:0:0: [sda] Write Protect is off
sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 2:0:0:0: [sda] Attached SCSI disk
Freeing unused kernel image memory: 2436K
Write protecting the kernel read-only data: 20480k
Freeing unused kernel image memory: 2008K
Freeing unused kernel image memory: 1872K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
x86/mm: Checking user space page tables
x86/mm: Checked W+X mappings: passed, no W+X pages found.
atl1c 0000:02:00.0: version 1.0.1.1-NAPI
pci 0000:00:00.0: Intel G41 Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 229376K stolen memory
[drm] Memory usable by graphics device = 2048M
checking generic (d0000000 300000) vs hw (d0000000 10000000)
fb: switching to inteldrmfb from VESA VGA
Console: switching to colour dummy device 80x25
[drm] Replacing VGA console driver
[drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[drm] Driver supports precise vblank timestamp query.
i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[drm] RC6 disabled, disabling runtime PM support
[drm] Initialized i915 1.6.0 20171023 for 0000:00:02.0 on minor 0
atl1c 0000:02:00.0 enp2s0: renamed from eth0
usb 3-1: new low-speed USB device number 2 using uhci_hcd
fbcon: inteldrmfb (fb0) is primary device
Console: switching to colour frame buffer device 180x56
i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
usb 3-1: New USB device found, idVendor=0458, idProduct=003a
usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-1: Product: USB Optical Mouse
usb 3-1: Manufacturer: Genius
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: Genius USB Optical Mouse as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/0003:0458:003A.0001/input/input5
hid-generic 0003:0458:003A.0001: input,hidraw0: USB HID v1.11 Mouse [Genius USB Optical Mouse] on usb-0000:00:1d.1-1/input0
tsc: Refined TSC clocksource calibration: 3333.268 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x300c0ff73e1, max_idle_ns: 440795367013 ns
usb 4-2: new full-speed USB device number 2 using uhci_hcd
usb 4-2: New USB device found, idVendor=24ae, idProduct=2000
usb 4-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 4-2: Product: RAPOO 2.4G Wireless Device
usb 4-2: Manufacturer: RAPOO
input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.0/0003:24AE:2000.0002/input/input6
hid-generic 0003:24AE:2000.0002: input,hidraw1: USB HID v1.01 Keyboard [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:1d.2-2/input0
input: RAPOO RAPOO 2.4G Wireless Device as /devices/pci0000:00/0000:00:1d.2/usb4/4-2/4-2:1.1/0003:24AE:2000.0003/input/input7
clocksource: Switched to clocksource tsc
hid-generic 0003:24AE:2000.0003: input,hiddev0,hidraw2: USB HID v1.01 Mouse [RAPOO RAPOO 2.4G Wireless Device] on usb-0000:00:1d.2-2/input1
random: plymouthd: uninitialized urandom read (8 bytes read)
random: plymouthd: uninitialized urandom read (8 bytes read)
raid6: sse2x1   gen()  5121 MB/s
raid6: sse2x1   xor()  5459 MB/s
raid6: sse2x2   gen()  5804 MB/s
raid6: sse2x2   xor()  6663 MB/s
raid6: sse2x4   gen()  9798 MB/s
raid6: sse2x4   xor()  7337 MB/s
raid6: using algorithm sse2x4 gen() 9798 MB/s
raid6: .... xor() 7337 MB/s, rmw enabled
raid6: using ssse3x2 recovery algorithm
xor: measuring software checksum speed
   prefetch64-sse: 13133.000 MB/sec
   generic_sse: 11693.000 MB/sec
xor: using function: prefetch64-sse (13133.000 MB/sec)
Btrfs loaded, crc32c=crc32c-generic
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
random: fast init done
ip_tables: (C) 2000-2006 Netfilter Core Team
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
systemd[1]: Detected architecture x86-64.
random: systemd: uninitialized urandom read (16 bytes read)
random: systemd: uninitialized urandom read (16 bytes read)
systemd[1]: Set hostname to .
random: crng init done
random: 5 urandom warning(s) missed due to ratelimiting
systemd[1]: Reached target System Time Synchronized.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Reached target User and Group Name Lookups.
systemd[1]: Created slice System Slice.
systemd[1]: Created slice system-openvpn.slice.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on Syslog Socket.
EXT4-fs (sda2): re-mounted. Opts: errors=remount-ro
lp: driver loaded but no devices found
systemd-journald[353]: Received request to flush runtime journal from PID 1
ppdev: user-space parallel port driver
parport_pc 00:02: reported by Plug and Play ACPI
parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
lp0: using parport0 (interrupt-driven).
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
intel_rng: FWH not detected
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247)
ACPI Warning: SystemIO range 0x0000000000000828-0x000000000000082F conflicts with OpRegion 0x0000000000000800-0x000000000000084F (\PMRG) (20170831/utaddress-247)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
leds_ss4200: no LED devices found
snd_hda_codec_via hdaudioC0D2: autoconfig for VT1708BCE: line_outs=1 (0x1c/0x0/0x0/0x0/0x0) type:line
snd_hda_codec_via hdaudioC0D2:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D2:    hp_outs=1 (0x1d/0x0/0x0/0x0/0x0)
snd_hda_codec_via hdaudioC0D2:    mono: mono_out=0x0
snd_hda_codec_via hdaudioC0D2:    inputs:
snd_hda_codec_via hdaudioC0D2:      Rear Mic=0x1a
snd_hda_codec_via hdaudioC0D2:      Front Mic=0x1e
snd_hda_codec_via hdaudioC0D2:      Line=0x1b
input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
gpio_ich: GPIO from 462 to 511 on gpio_ich
intel_powerclamp: No package C-state available
intel_powerclamp: No package C-state available
Adding 3998716k swap on /dev/sda1.  Priority:-2 extents:1 across:3998716k FS
EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
audit: type=1400 audit(1592229228.960:2): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/sbin/dhclient" pid=804 comm="apparmor_parser"
audit: type=1400 audit(1592229228.960:3): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=804 comm="apparmor_parser"
audit: type=1400 audit(1592229228.960:4): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=804 comm="apparmor_parser"
audit: type=1400 audit(1592229228.960:5): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/connman/scripts/dhclient-script" pid=804 comm="apparmor_parser"
audit: type=1400 audit(1592229228.960:6): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/bin/man" pid=806 comm="apparmor_parser"
audit: type=1400 audit(1592229228.960:7): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_filter" pid=806 comm="apparmor_parser"
audit: type=1400 audit(1592229228.960:8): apparmor="STATUS" operation="profile_load" profile="unconfined" name="man_groff" pid=806 comm="apparmor_parser"
audit: type=1400 audit(1592229228.972:9): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session" pid=803 comm="apparmor_parser"
audit: type=1400 audit(1592229228.972:10): apparmor="STATUS" operation="profile_load" profile="unconfined" name="/usr/lib/lightdm/lightdm-guest-session//chromium" pid=803 comm="apparmor_parser"
audit: type=1400 audit(1592229228.980:11): apparmor="STATUS" operation="profile_load" profile="unconfined" name="libreoffice-oopslash" pid=807 comm="apparmor_parser"
vboxdrv: loading out-of-tree module taints kernel.
vboxdrv: module verification failed: signature and/or required key missing - tainting kernel
vboxdrv: Found 2 processor cores
vboxdrv: fAsync=0 offMin=0x280 offMax=0x9b0
vboxdrv: TSC mode is Synchronous, tentative frequency 3333268400 Hz
vboxdrv: Successfully loaded version 6.1.10 (interface 0x002d0001)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
atl1c 0000:02:00.0: atl1c: enp2s0 NIC Link is Up
aufs 4.15-20180219
kauditd_printk_skb: 14 callbacks suppressed
audit: type=1400 audit(1592229240.464:26): apparmor="STATUS" operation="profile_load" profile="unconfined" name="docker-default" pid=2288 comm="apparmor_parser"
bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
Bridge firewalling registered
nf_conntrack version 0.5.0 (65536 buckets, 262144 max)
Initializing XFRM netlink socket
Netfilter messages via NETLINK v0.30.
ctnetlink v0.93: registering with nfnetlink.
IPv6: ADDRCONF(NETDEV_UP): docker0: link is not ready
pulseeffects[3012]: segfault at 70 ip 00005584b4bf84d7 sp 00007fffdb560930 error 4 in pulseeffects[5584b4ad9000+38b000]
perf: interrupt took too long (2507 > 2500), lowering kernel.perf_event_max_sample_rate to 79750
perf: interrupt took too long (3134 > 3133), lowering kernel.perf_event_max_sample_rate to 63750

Return To Intel Xeon X5260 System Information